Mast Treat

[tooold2dance]

you can use a different size mast ie on the 5.7 which calls for a 400/430 combo

You can use the 5.7 on the straight 430, but the factory set calibrated downhaul gauge will not be correct. This is not a problem though, because the gauge is movable, so you can set it for the 430. The rigging guide includes a visual rigging method that is also fairly accurate. Once you know your downhaul setting, you would just move the gauge to line up with the bottom of the mast.

[jjma]

My mistake I meant a 430/400 combo which measured was too long. I worked out it was 10cm longer so moved the calibration pointer accordingly.

Jon